Continuous Ridge Vents
Building Components for Roof Systems
Continuous Ridge Vents used on metal roofing systems roofs conform to high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user.
Canopies are constructed of 26 gauge material around an 18 gauge galvanized frame. Telescoping channels mount between girts on the interior of the building. Channels will accommodate girt spacing of up to 7 ft. 6 inches. 1/2" threaded rod connects channels to canopy frame. All hardware necessary for installation is included.
CONSTRUCTION
- Durable 26 gauge exterior
- Internal components of 24, 20 and 18 gauge die formed
sheet metal
and machined parts
SIZES
- 10 ft. sections of 9" throat and 12" throat
- Other sizes available upon request
FINISHES
- Pre-painted or galvalume is standard
- Other materials and finishes available upon request
DESIGN SPECIFICATIONS
- Fully protected by 4 x 4 mesh galvanized hardware cloth
- Easy-moving damper opens to any degree, from fully open to completely closed
- Aerodynamically proportioned to exclude weather
Continuous Ridge Vent Product Specifications Sheet
FLORIDA APPROVED CONTINUOUS RIDGE VENTS
Florida Approved Ridge Vents
Building Components for Roof Systems
Performance testing was conducted by Architectural Testing Inc. on the Flat Skirt Continuous Ridge Ventilator (ATI 60793.01-801-44 R1).
Used on metal roofing systems roofs conform to high standards and specifications which have been developed, tested and proven over many years. They provide an excellent value for the user.
CONSTRUCTION
- Durable 26 gauge exterior
- Internal components of 24 gauge steel, reinforced bracing and
additional fasteners
SIZES
- 10 ft. sections of 9" throat and 12" throat
- Other sizes available upon request
FINISHES
- Pre-painted or galvalume is standard
- Other materials and finishes available upon request
DESIGN SPECIFICATIONS
- Fully protected by 4 x 4 mesh galvanized hardware cloth
- Easy-moving damper opens to any degree, from fully open to completely closed
- Aerodynamically proportioned to exclude weather
Florida Approved Continuous Ridge Vent Product Specifications Sheet
FLORIDA APPROVED CONTINUOUS RIDGE VENTS
Low Profile Florida Approved Floating Ridge Vents
Building Components for Roof Systems
Performance testing was conducted by Architectural Testing Inc. on the Ridgelinne Ridge Ventilator (ATI 60793.01-801-44 R1).
Canopies are constructed of 26 gauge material around an 18 gauge galvanized frame. Telescoping channels mount between girts on the interior of the building. Channels will accommodate girt spacing of up to 7 ft. 6 inches. 1/2" threaded rod connects channels to canopy frame. All hardware necessary for installation is included.
CONSTRUCTION
- Durable 26 gauge exterior
- Internal components of 24 gauge steel, reinforced bracing and
additional fasteners
SIZES
- 10 ft. sections
- Other sizes available upon request
FINISHES
- Pre-painted or galvalume is standard
- Other materials and finishes available upon request
DESIGN SPECIFICATIONS
- Aerodynamically proportioned to exclude weather
Low Profile FL Approved Floating Ridge Vent Product Specifications Sheet