Building Systems and Product Information:






ROOF SYSTEMS

STANDARD ROOF PANEL PROFILES

"R" and "PBR" Panel ("PBR" Shown)

"M" and "PBM" Panel ("PBM" Shown)

 

"Choice Rib" Panel

PLATINUM SERIES STANDING SEAM ROOF

Rigid’s Platinum Series is a revolutionary patented standing seam roof system that incorporates two unique seams.The Triple-Lok seam for normal wind speeds and the Quad-Lok for coastal areas and other high wind speed zones.

The Platinum Series incorporates a double seam, double hook side lap design to resist seam failure between supports and side lap unfurling and unzipping. It is a roof system with tremendous strength designed to withstand the most strenuous uplift testing and highest velocity wind speeds. Combine that with its aesthetic appeal which is a favorite of architects and building owners alike, and you have an unsurpassed panel in look and quality.

Available in all of Rigid’s Spectralite 3000 Fluoropon 70%, Kynar 500/Hylar 5000 colors. The Platinum Series offers you a wide range of colors to enhance the beauty of your project and give you unsurpassed coating performance for continued beauty year after year.


CLICK FOR CROSS SECTION

HI-TECH SERIES STANDING SEAM ROOF

Rigid has used the latest technology available to develop a metal roof system that’s designed for tomorrow; with components and techniques that outperform others by specifically addressing current and anticipated building codes and roofing requirements.

Our proven, patented seam utilizing the TS-364 panel system’s technology provides superior wind and weather protection under all loading conditions, the seam geometry and seaming methods to virtually assure that your installed roof will perform as it was designed at a minimal cost.


CLICK FOR CROSS SECTIONS

RHR-9000 HIGH RIB ROOF PANEL

This versatile insulated panel is equally impressive for exterior wall or roof applications. Available with R-values up to 42, the RHR-9000 gets especially high marks as a roof panel for commercial buildings, recreational facilities, cold storage buildings and other low temperature applications. It is designed for use in both new and re-roof applications where speed of erection, light weight and thermal efficiency add value to the roofing system.

Panel Thickness: 1.5, 2, 2.5, 3, 4 and 5”

R-value by ASTM C-236: 14.2, 18.2, 22.2, 26.2, 34.2, 42.2

Panel Width: 40”

Panel Length: 48’ 0” standard maximum

 
   
 

Copyright © 1990 - 2008 All Rights Reserved
Rigid Building Systems, Ltd.
18933 Aldine Westfield
Houston, TX 77073

Web Design by Chervnsik Web Design & Graphics